Mounting brackets for solar panels on a flat roof or in the garden
The zero VAT rate under § 12 (3) UStG applies only to deliveries to Germany.
Current delivery address: Germany.
Zero VAT rate
Zero VAT rate under § 12 (3) UStG
Since 1 January 2023 a VAT rate of 0 % applies to certain photovoltaic products.
The zero rate applies if all three points are true
You are, or will be, the operator of a photovoltaic system.
The goods are solar modules, components essential for operating the system, or storage units for the electricity the modules generate.
The system is installed on or near private homes, dwellings, and public or other buildings used for activities serving the common good.
Up to 30 kWp no proof is required. The conditions are deemed met if the installed gross capacity of the system according to the Marktstammdatenregister does not and will not exceed 30 kilowatts (peak).
When it does not apply
If the goods are not bought for a photovoltaic system — for camping, travel or resale, for example — the regular rate applies. Choose 19 % VAT in that case.
Should the conditions not have been met despite your confirmation, the statutory VAT may be charged afterwards.
Text of the law: § 12 (3) UStG. We do not provide tax advice — if in doubt, please consult your tax adviser.
€43.65
€45.00
Save 3%
0 % VAT per § 12
€51.94(incl. 19 % VAT)
14-day right of withdrawal
Estimated dispatch: 30 October – 3 November (3–5 working days after payment)
In stock
Device type:
Solar panel mounts
Compatibility:
Balcony solar power plants and solar panels
Mounting options:
Flat roof
EAN-13:
4251613516723
MPN:
1-02292
165118-4
Mounting brackets for installing a solar panel on a flat roof or in the garden.
Drill-free installation with concrete slab ballasting.
Adjustable tilt angle from 18 to 22 degrees.
Suitable for panels between 95 and 115 cm wide.
Sturdy 2 mm thick steel construction.
Magnelis coating for long-lasting corrosion protection.
Direct module mounting without additional mounting rails.
Includes 2 supports, protective mats and mounting screws.
00
day
:
00
hour
:
00
min
:
00
sec
Additional accessories
Compatible products
With the EcoFlow Balcony Power Station, you can generate your own solar power and reduce your electricity bills in the long term.
The system is quick to set up, simply plugs into a socket and supplies up to 800 W directly to your home’s mains supply.
Plug & Play: easy installation without the need for an electrician.
800 W output: covers your household’s base load, e.g. fridge, router and devices on standby.
EcoFlow app: Real-time power generation and consumption monitoring via Wi-Fi or Bluetooth.
Expandable: can be combined with an EcoFlow energy storage unit so you can use solar power in the evenings too.
Versatile: ideal for balconies, patios, gardens or flat roofs.
Three solar panels with a combined output of 1,455 Wp provide usable energy even on overcast days.
The EcoFlow STREAM Ultra stores the surplus energy in its 1.92 kWh battery and uses it to power your home well into the night. With four MPPT inputs, there’s even room for an additional panel.
4 MPPT trackers: Each panel operates independently; partial shading has virtually no impact on the system.
Future-proof: Storage capacity expandable up to 11.52 kWh.
Suitable for year-round use: IP65-rated, with self-heating in cold conditions.
Whisper-quiet: under 30 dB during operation.
Everything at a glance: controlled via the EcoFlow app.
The set comprises two solar panels with a combined output of 970 Wp and the EcoFlow STREAM Max, which combines an inverter and a battery in a single unit.
Surplus solar power is stored and is available to you in the evening.
All-in-one: inverter and 1.92 kWh battery in a single unit.
Durable: LFP battery with up to 6,000 charge cycles.
With a module output of 1,000 Wp, the balcony power plant generates plenty of solar power during the day. Any power you aren’t using at the moment is stored in the 1.92 kWh battery and is available for you in the evening and at night.
This way, you can make more use of your own electricity and buy less from the grid.
1,000 Wp module capacity: high yields even in low light.
1.92 kWh storage: use solar power even after sunset.
Plug & Play: quick to set up and easy to plug into a socket.
Versatile: suitable for balconies, patios, gardens or flat roofs.
Mounting brackets for solar panels on flat roofs and in gardens are a practical installation system for fitting solar modules to flat surfaces without drilling. They are suitable for flat roofs, terraces, garages, canopies, carports or free-standing installations in the garden, where the panel needs to be securely fixed and correctly oriented towards the sun.
The main advantage of this system is the adjustable tilt angle of 18 to 22 degrees. This allows the position of the solar panel to be better adapted to the installation conditions and increases generation efficiency on a flat surface. This solution is well suited for balcony solar power stations and small domestic solar power stations.
The mounting system is designed for solar panels with a width of 95 to 115 cm. The module is mounted in a horizontal position, and thanks to the direct mounting of the panel, no additional mounting rails are required. This simplifies installation, makes the structure more compact and reduces the number of unnecessary components.
The system is installed without drilling. Concrete slabs, which can be selected separately, are used for ballasting. This installation method is convenient where it is undesirable to damage the roof covering or when a more flexible solution is required for placing the solar module in an open area.
The structure is made of 2 mm thick steel and features a durable Magnelis coating, which provides a high level of corrosion protection even when used outdoors. This makes the mounting system suitable for long-term use in the presence of moisture, wind, sun and other weather conditions. The claimed corrosion protection can last up to 30 years.
For additional protection when installing on a bitumen roof, protective mats are included in the kit. The kit also contains all the necessary mounting screws, so the system is well-prepared for quick assembly and installation.
The kit includes 2 adjustable supports, protective mats for the roof and mounting screws. All you need to do is install the structure, position the solar panel and add the appropriate ballast.
Mounting brackets for solar panels on flat roofs and in gardens are a convenient solution for those who want flexible installation without drilling, adjustable tilt, a robust outdoor structure and long-lasting corrosion protection.