The zero VAT rate under § 12 (3) UStG applies only to deliveries to Germany.
Current delivery address: Germany.
Zero VAT rate
Zero VAT rate under § 12 (3) UStG
Since 1 January 2023 a VAT rate of 0 % applies to certain photovoltaic products.
The zero rate applies if all three points are true
You are, or will be, the operator of a photovoltaic system.
The goods are solar modules, components essential for operating the system, or storage units for the electricity the modules generate.
The system is installed on or near private homes, dwellings, and public or other buildings used for activities serving the common good.
Up to 30 kWp no proof is required. The conditions are deemed met if the installed gross capacity of the system according to the Marktstammdatenregister does not and will not exceed 30 kilowatts (peak).
When it does not apply
If the goods are not bought for a photovoltaic system — for camping, travel or resale, for example — the regular rate applies. Choose 19 % VAT in that case.
Should the conditions not have been met despite your confirmation, the statutory VAT may be charged afterwards.
Text of the law: § 12 (3) UStG. We do not provide tax advice — if in doubt, please consult your tax adviser.
€32.77
0 % VAT per § 12
€39.00(incl. 19 % VAT)
14-day right of withdrawal
Estimated dispatch: 24–26 November (3–5 working days after payment)
In stock
Compatibility:
Сонячні панелі та PV-системи з MC4-підключенням
EAN-13:
4251613508124
MPN:
1-00470
165118-9
The cable is 3 m long.
Conductor cross-section: 6 mm².
MC4-compatible connectors.
For solar panels, inverters and balcony power stations.
Suitable for outdoor use.
Resistant to UV rays and weather conditions.
Minimal power loss over short distances.
Easy connection without special tools.
Additional accessories
Compatible products
Set of 2 Jolywood solar panels, 500 W each.
1000 W total output for balcony power stations and PV systems.
N-type TOPCon technology with up to 23.2% efficiency.
Bifacial module for additional yield from the rear side.
Glass-on-glass construction for high weather resistance.
Full black design for a modern and discreet look.
MC4-compatible connection.
25-year product warranty and 30-year linear performance warranty.
Three solar panels with a combined output of 1,455 Wp provide usable energy even on overcast days.
The EcoFlow STREAM Ultra stores the surplus energy in its 1.92 kWh battery and uses it to power your home well into the night. With four MPPT inputs, there’s even room for an additional panel.
4 MPPT trackers: Each panel operates independently; partial shading has virtually no impact on the system.
Future-proof: Storage capacity expandable up to 11.52 kWh.
Suitable for year-round use: IP65-rated, with self-heating in cold conditions.
Whisper-quiet: under 30 dB during operation.
Everything at a glance: controlled via the EcoFlow app.
The set comprises two solar panels with a combined output of 970 Wp and the EcoFlow STREAM Max, which combines an inverter and a battery in a single unit.
Surplus solar power is stored and is available to you in the evening.
All-in-one: inverter and 1.92 kWh battery in a single unit.
Durable: LFP battery with up to 6,000 charge cycles.
With a module output of 1,000 Wp, the balcony power plant generates plenty of solar power during the day. Any power you aren’t using at the moment is stored in the 1.92 kWh battery and is available for you in the evening and at night.
This way, you can make more use of your own electricity and buy less from the grid.
1,000 Wp module capacity: high yields even in low light.
1.92 kWh storage: use solar power even after sunset.
Plug & Play: quick to set up and easy to plug into a socket.
Versatile: suitable for balconies, patios, gardens or flat roofs.
The 3 m solar panel extension cable is a practical cable for a short and reliable connection between a solar panel and an inverter, micro-inverter or other components of a PV system. It is well suited for balcony power stations, small domestic solar systems, and installation on a roof, balcony, terrace or in the garden.
The 3 m length provides extra freedom during installation when you need to neatly route the cable between the solar module and the connection device. This length is convenient for short distances where it is important not to have excess cable, whilst still allowing sufficient flexibility for correct panel positioning.
The cable has a conductor cross-section of 6 mm², which helps to reduce energy losses and ensure stable current transmission from the solar panel. This is particularly important for balcony power stations and PV systems, where every watt of solar generation must be used as efficiently as possible.
MC4-compatible connectors allow the cable to be quickly and safely connected to the corresponding sockets on solar panels or other compatible equipment. No special tools are required for connection, making the cable suitable for both new installations and the expansion of existing systems.
The extension cable is designed for long-term outdoor use. The cable is resistant to UV light, weather conditions and daily exposure to the external environment. This makes it a reliable solution for solar systems operating all year round.
This cable is the right choice if you need to slightly increase the distance between the solar panel and the inverter, neatly route the connection line, or make the installation more flexible without any noticeable loss of power.