Power Dock Multisystem Anker SOLIX

Anker SOLIX Power Dock – a central expansion module for the Solarbank Multisystem

The Anker SOLIX Power Dock is the ideal solution for anyone wishing to expand a single Solarbank system into a larger, more powerful home energy system. It connects several Anker SOLIX Solarbank units to form a multisystem, thereby providing significantly more storage capacity, greater charging power and greater flexibility in everyday life.

Whilst a traditional balcony solar power system is usually limited to a small feed-in capacity, the Power Dock goes one step further. It is designed for households that not only wish to use solar power directly during the day, but also want to store it, distribute it and make it available for larger appliances. This is particularly of interest to homeowners, larger PV installations, households with high electricity consumption or users who wish to expand their Solarbank system at a later date.

Up to 4 Solarbank units in a single system

Up to 4 Solarbank units can be connected to the Anker SOLIX Power Dock. This allows the system to be expanded gradually, without having to purchase the maximum configuration from the outset. Those who start small can add further storage units later and adapt the system to their actual electricity requirements.

More power for your home and PV system

The Power Dock supports up to 4.8 kW AC output and up to 14.4 kW PV input (with 4 Solarbanks). This means it is designed to handle significantly larger amounts of solar power than simple balcony solutions. In combination with suitable PV modules and compatible solar bank storage units, more solar energy can be generated, stored and used in the home.

Expandable to up to 64.5 kWh storage capacity

In the maximum system configuration, a total capacity of up to 64.5 kWh can be achieved via the connected Solarbank storage units and expansion batteries – the Power Dock itself does not contain a battery. This makes the Anker SOLIX Power Dock particularly appealing to users who wish to significantly increase their self-consumption and build up larger electricity reserves for the evening, night or periods with less sunshine.

Also designed for charging electric vehicles

The system supports both a single-phase charging option at 7.4 kW and a three-phase charging option at 11 kW (with the Anker SOLIX V1 Wallbox, available separately). This means the Power Dock can form part of a well-thought-out energy solution in which solar power is used not only for household appliances but also for charging an electric vehicle.

Check the status directly on the device

The integrated LED display shows key information directly on the Power Dock. This allows you to quickly check the operating status without having to rely solely on the app every time. This is particularly handy if the device is installed in a utility room, garage or a fixed installation area.

Designed for permanent installation and long-term use

The housing is protected against dust and splashing water to IP54 standard. The specified service life is up to 15 years, with a 10-year manufacturer’s warranty. This means the Power Dock is not intended as a short-term accessory, but as a central component of a long-term, expandable energy system.

Important installation note

The Anker SOLIX Power Dock must be installed by a qualified electrician and the system must be registered with the grid operator: with a feed-in power of up to 4.8 kW, it is no longer classified as a plug-in solar device (800 W limit), but as a standard PV system. Depending on the system configuration, PV modules, Solarbank storage units, smart meters, the main distribution board and an optional EV charger can be integrated. Before purchasing, you should check which Anker SOLIX components are available and what system configuration is planned.