Bluetti EP600+4xB500 Home Backup Power Station

TheBluetti EP600+4xB500 is a powerful home energy storage system for your home, holiday home, office or small commercial premises. The kit consists of an EP600 hybrid inverter and four B500 battery packs, providing 6000 W of rated power and a total capacity of 19,840 Wh.

This configuration is suitable for situations where you need not just a short-term backup for a few gadgets, but a substantial energy reserve for critical loads. The system can support the operation of lighting, a fridge, pumping equipment, a router, a heating system, office equipment, some household appliances and other equipment within the permissible load limits.

The EP600 inverter has a rated AC power of 6000 W and operates on three phases. The hybrid inverter type allows the system to be used not only as a backup power source but also as part of a power system with solar panels. For this purpose, it features 2 MPPT trackers and supports a PV array with a capacity of up to 6 kW.

The battery pack is based on LiFePO4 batteries. This type of battery is well suited for stationary energy storage systems due to its stable operation, high level of safety and long service life. For this configuration, the service life is specified as up to 3,500 cycles, with a total battery pack capacity of 200 Ah and a nominal battery voltage of 99.2 V.

The set with four B500 batteries has a significantly greater energy reserve than versions with two or three batteries. The capacity of 19,840 Wh allows critical devices to be kept running for longer during a power cut. The actual runtime depends on the total load and usage scenario.

The system supports UPS and pass-through charging, so it can function as a home backup power source during grid instability. This is particularly useful for facilities where it is essential to maintain the operation of heating, communications, lighting, pumps or other equipment without long interruptions.

For control purposes, the system allows for remote adjustment of operating parameters. This makes it easier to monitor the system, configure operating modes and adapt it to your own consumption schedule, solar generation or backup scenario.

The housing has an IP65 rating, which increases the system’s resistance to dust and moisture. However, for outdoor installation, it is important to ensure correct mounting and protection from direct weather exposure. The total weight of the kit is 264 kg, so the system is best considered as a fixed solution for professional installation.

The Bluetti EP600+4xB500 is an advanced configuration for those who require high capacity, three-phase operation, solar panel support, LiFePO4 batteries, a UPS, pure sine wave output, and a reliable home backup system based on the Bluetti modular system.