Bluetti EP600 Inverter

The Bluetti EP600 inverter is a three-phase hybrid inverter designed for setting up a domestic or commercial energy storage system. This model works in conjunction with the Bluetti B500 battery modules and enables the creation of a system for emergency power supply, solar power storage and off-grid operation for private households, offices or smaller premises.

The EP600 is part of the ‘Home Energy Storage System’ product range and is designed for operation in both on-grid and off-grid modes. This means that the system can be operated both in conjunction with the public electricity grid and in autonomous mode. This configuration is suitable for users who require not just an emergency power supply for individual devices, but a fully-fledged energy system for critical domestic or work-related loads.

The rated power of a single inverter is 6 kW. When two sets are used in parallel, the system can be scaled up to 12 kW. This allows lighting, fridges, routers, computer equipment, pumps, heating systems, household appliances, office equipment and other loads to be powered within the permissible load limits.

The system uses B500 battery modules, each with a capacity of 4.96 kWh. Depending on the number of batteries, a capacity ranging from 9.92 kWh (2 × B500) to 39.68 kWh (8 × B500) can be achieved. This range allows you to choose a configuration for various scenarios: from a basic backup for essential appliances to a longer-term autonomous power supply for the home.

The EP600 operates on a three-phase mains supply of 230 V/400 V at a frequency of 50 Hz. The phase configuration is specified as L1/L2/L3/N/PE. This is important for properties with a three-phase connection where the load must be distributed evenly across the phases and the operation of higher-power appliances must be maintained.

A PV input with a capacity of up to 6 kW per inverter is provided for solar power generation. The MPPT range is 150–500 V, the nominal value is 360 V and the maximum current per MPPT input is 12.5 A. The system features 2 independent MPPT inputs, enabling more efficient operation with different groups of solar panels.

The inverter features an emergency power supply function with a switchover time of less than 10 ms. This helps to maintain the operation of sensitive equipment in the event of a power cut and reduces the risk of sudden shutdowns of computers, network devices, CCTV systems, alarm systems and other critical equipment.

The inverter’s maximum efficiency is up to 94 per cent. This helps to utilise the energy from batteries and solar panels efficiently and reduce conversion losses. This figure is of great importance for the day-to-day operation of an energy storage system, as it has a direct impact on the amount of energy that can actually be utilised.

The inverter’s housing has an IP65 protection rating, which provides the unit with better protection against dust and moisture. The operating temperature range is from -20 °C to +50 °C, and the noise level is up to 50 dB. This allows the EP600 to be used in plant rooms or sheltered installation areas.

Wi-Fi and Bluetooth are provided for communication and control. Via the monitoring system, the user can check the status of the inverter, the batteries, solar power generation and consumption. This is useful for the day-to-day monitoring of system operation and for optimising the use of stored energy.

The inverter measures 636 × 325 × 370 mm and weighs 42 kg. It is a stationary system that requires the correct selection of batteries, solar panels and protective devices, as well as a professional connection to the mains supply.

The Bluetti EP600 is the solution for users who require a scalable three-phase emergency power system. The inverter combines an output power of 6 kW, support for B500 batteries, a system capacity of up to 39.68 kWh, a PV input of up to 6 kW, 2 MPPT inputs, a switchover to emergency power in less than 10 ms, IP65 protection, Wi-Fi, Bluetooth and a 10-year warranty.